How do I configure my CISCO CP 8800 Series?

Juan Meneses

October 20, 2022 20:26 Updated

Hi dear all,

Once your phone is correctly connected to the Internet, please follow these instructions:

1. Press the settings button
2. Select Admin Settings (option 6)
3. Then Select Network Setup
4. Select Ethernet Setup
5. Then select IPv4 Setup
6. Browse with navigation buttons, select Alternate TFTP (OPTION 8) and set it to ON
7. Set TFTP Server 1 (option 9) to 209.126.122.59
8. Set TFTP Server 2 (option 10) to 70.35.204.237
9. Click on Save.
10. Then press settings button again
11. Select security setup
12. Then select Trust list
13. Select CTL File and press 'Erase'.
14. Go back one level and Select ITL File (option 2) and press 'Erase'.
15. If you cannot erase the ITL/CTL File is because it had already been deleted.

Please note If a password is requested then use cisco in lowercases.

That's all!

Thanks.