How to Configure Jabra Pro 9450 Headsets on Cisco Phones

Prerequisites:

Jabra Pro 9450 + Jabra Link 14201-22

In combination with one of the following phones:

• Cisco 7942G
• Cisco 7945G
• Cisco 7962G
• Cisco 7965G
• Cisco 7975G

Connection:

1. Insert the RJ10 to RJ10 connection cable supplied with the Pro 94x0 in the headset interface on the Cisco phone and in the socket marked with a phone icon on the 94x0 base
2. Connect the EHS adapter with the AUX socket on the Cisco phone and the AUX interface on the base.

Automatic configuration:

To start the automatic configuration, have someone call the phone and wait at least 10 seconds before answering. The appropriate EHS mode should now be installed. If this did not work, select the Cisco mode manually.

Base setup:

Set the phone setup switch to position "B".

Microphone level setup:

Remove the cover from the base of the Jabra Pro 9450 and make a test call with the headset. Adjust the level until you achieve the appropriate volume.