When you install the XCALLY server behind NAT, you need to properly setup the parameters externip and localnet
(otherwise you will probably have no audio properly working)
You can setup those parameters inside the Web section Settings - Network
Example:
Suppose you have the following network details on your AMAZON AWS XCALLY server:
Private IP address and mask configured inside the Linux machine = 192.168.5.37 mask 255.255.255.0 (ifconfig Linux command to check)
Public IP address to reach the server = 54.233.4.6
It means you will need to configure the following Settings - Network parameter on the XCALLY MOTION interface:
localnet: 192.168.5.0 mask 255.255.255.0
externip: 54.233.4.6
You DO NOT need to setup externip or localnet if the XCALLY server is NOT behind a NAT
Comments
0 comments
Please sign in to leave a comment.